This is our complete 2g dsm race kit , it includes our 10.5" bar and plate -tube and fin hybrid core intercooler , 2.5 piping all the way to the throttle body elbow and bolts to a 14b , 16g or t25. Option for a 20g or t3/t4 as well.
Check out these features :
~ 30x10.5x2.8 intercooler 25x10.5x2.8 core
~ 980 cfm @ 1.5 psi 78% efficiency at 60mph
~ Silicone Couplers and SS T-Bar Clamps
~ 1g , greddy , or blitz BOV flange
~ Translator Kit Optional , same price
~ Intercooler hangs from the core support , bumper modification required.
No intercooling piping included
This is the largest intercooler that can be fit to the 2g dsm without major modification. The piping is short route and goes around the core support . This kit retains both stock fans , the power steering cooler must be removed and looped back into itself. There is very minor splash guard and nose trimming required. This is a complete kit and features all the piping , silicone couplers and SS T-Bar clamps.
This intercooler features our hybrid bar and plate - tube and fin core. It gives you the best features of both designs. It has very fine internal fins normally only found in bar and plate units. These internal fins are only .004 thick and run from top to bottom in the tube. This makes it far more efficient than all extruded tube cores, as the thinnest fin that can be extruded is .020 and the fin spacing is much farther apart. These fins are also louvered and staggered to give up to 4x the heat transfer area of most of the other bar and plate cores . The other highlight of this core is that these fine internal fins are stuffed inside a round nosed tube to give much more airflow through the core than bar and plate, so the radiator stays cool. Also the tubes on this core change thickness: they are very thin in the middle of the core to aid heat transfer from the outside fins to the inside fins. Then as the tube approaches the front of the core it goes from .040 thick to .120 thick at the nose so it can withstand rocks and debris at high speeds. It has been pressure tested to 35psi and does not leak. The end tanks are made of heavy wall material and will not crack even under extreme heat. The in/out are bead rolled and hand ported for the best flow.
Please Specify a few things in the comments box (which is the very last screen when ordering) :
The flanges offered that are included in the price are Stock 1G, Blitz, Greddy, and TurboXS. HKS and Tial flanges are available at an additional charge. Please specify your BOV.
Intercooler piping color - Black or Silver, other basic color's available for an additional $20.00
The turbo options offered (included in price) are for Stock T25, 14b, 16G, 18G, 20G, T3/T4. Please specify your turbo.
This kit is guaranteed for fitment, quality, and function. You will not be disappointed with this kit.
Please contact us if you have any question's regarding this kit.